Solar Battery Charge Settings UK: A Seasonal Schedule for Smart Tariffs and Solar Self-Consumption
battery settingssmart tariffsself-consumptionoff-peak chargingsolar battery storage

Solar Battery Charge Settings UK: A Seasonal Schedule for Smart Tariffs and Solar Self-Consumption

PPower Suppliers Editorial Team
2026-11-13
7 min read

Use this UK guide to set seasonal solar battery charge, discharge and export schedules, compare smart tariffs and review savings monthly.

Choosing solar battery charge settings in the UK is a balancing exercise between using your own solar power, taking advantage of cheaper electricity periods and preserving energy for later. This guide gives you a repeatable seasonal schedule, a simple calculation method and a monthly review checklist for adjusting a home battery alongside a smart tariff.

Overview

A battery can usually serve three competing purposes: store surplus solar generation, reduce electricity bought from the grid and provide limited backup during an outage. The best solar battery settings UK households use will depend on which of these matters most, as well as the battery’s usable capacity, charge and discharge limits, inverter controls, tariff rules and export arrangements.

In general, charge from solar when generation would otherwise be exported and discharge to meet household demand later. Grid charging can also make sense when your import price is substantially lower during an approved off-peak period than the price you would otherwise pay when the battery discharges. However, grid charging is not automatically profitable: energy is lost during charging and discharging, and some tariffs or battery systems restrict automated charging, exporting or participation in time-of-use plans.

Do not treat a battery schedule as permanent. Winter demand, summer solar output, changing tariff rates, electric vehicle charging and a new export payment can all alter the result. Keep a record of settings and actual meter outcomes so that you can compare the plan with reality.

How to estimate the best charge and discharge plan

Start with the value of one unit of energy moved through the battery. A simple estimate is:

Effective cost of stored electricity = off-peak import price ÷ round-trip efficiency

For example, if an illustrative tariff charges 12 pence per kilowatt-hour during an off-peak period and the battery has an assumed round-trip efficiency of 90%, the effective energy cost is approximately 13.3 pence per kilowatt-hour before fixed charges, battery wear and any other fees are considered. This figure can then be compared with the price you would otherwise pay when using electricity in the evening.

For solar energy, compare the value of using one stored unit in the home with the value of exporting it:

Value of self-consumption = avoided import price − battery losses − any relevant operating cost

If the alternative is exporting surplus solar, include the export payment you would have received. Self-consumption is more attractive when the avoided import price is higher than the export value. Conversely, exporting may be preferable when the battery is already full, household demand is low or the export payment is more valuable than storing energy for a later low-cost period.

Use the battery’s usable capacity rather than its headline capacity. Also check whether the manufacturer specifies separate charge and discharge efficiency, a minimum state of charge, a reserve percentage or a maximum daily cycle. These details can materially change the estimate.

Practical decision table

SituationUsually sensible starting settingWhat to check
Bright day with expected surplus solarPrioritise solar charging and hold enough capacity for evening demandForecast generation, household load and export payment
Dark winter day with a low off-peak rateConsider scheduled grid charging, if permitted and economicalRound-trip efficiency, battery reserve and next-day demand
High evening import priceDischarge during the expensive period, subject to reserve limitsWhether the battery can respond automatically and the end time of the period
Low household demand and strong export valueCompare exporting with storing before selecting a discharge targetSEG tariff terms, export meter data and battery capacity
Backup is importantKeep a higher minimum state of chargeBackup circuits, outage behaviour and whether backup requires additional equipment

Inputs and assumptions

Create a small worksheet before changing your solar battery smart tariff settings. Record the following inputs:

  • Import prices: note the rates for each relevant time period, including any weekday or weekend differences.
  • Export payment: record the rate, eligibility conditions, meter requirements and whether the payment varies by time.
  • Battery data: enter usable capacity, round-trip efficiency, maximum charge and discharge power, minimum reserve and warranty cycle conditions.
  • Demand profile: estimate when the home uses energy for cooking, heating, hot water, laundry, an EV or other large loads.
  • Solar profile: use your monitoring history rather than a generic annual estimate where possible. Separate a typical clear day from a dull day.
  • System restrictions: check the inverter and battery app for permitted charge windows, export limits, firmware requirements and emergency reserve controls.

For a new system, battery sizing should follow the home’s demand and generation pattern rather than simply selecting the largest available capacity. The related solar battery storage buying guide covers capacity, chemistry, inverter compatibility and backup features. If you are still assessing the solar array, use the UK solar panel sizing worksheet alongside this calculation.

Keep assumptions conservative. A battery will not necessarily receive its full rated capacity every day, and winter solar output can be inconsistent. Avoid counting the same energy twice—for example, do not treat a stored unit as both exported energy and electricity used in the home.

Worked examples

Example 1: solar self-consumption

Assume a home produces 8 kWh of surplus solar on a clear day, uses 4 kWh in the evening and has a battery with 5 kWh of usable capacity. The battery cannot store all the surplus. A sensible starting schedule is to charge from solar until the battery reaches its operating limit, retain enough for the expected evening load and export the remaining surplus.

If the home would otherwise buy evening electricity at an illustrative 28 pence per kilowatt-hour and could export surplus at 8 pence per kilowatt-hour, storing energy for household use appears more valuable than exporting it. The comparison should still allow for battery losses. If the battery supplies 4 kWh after receiving more than 4 kWh, the value of the lost energy must be included in the calculation.

Example 2: off-peak grid charging

Assume an off-peak import rate of 12 pence per kilowatt-hour, an expensive-period rate of 28 pence and a round-trip efficiency of 90%. The effective stored energy cost is approximately 13.3 pence per kilowatt-hour. On these illustrative assumptions, charging during the cheaper period may reduce the cost of later consumption, provided the battery has enough capacity, the schedule is allowed and the battery does not need to be reserved for backup.

Do not fill the battery from the grid simply because an off-peak window exists. If the next day is expected to provide ample solar, grid charging may leave less room for solar energy and increase exports or curtailment. A forecast-based setting may be more suitable than a fixed overnight charge.

Example 3: export versus evening use

Suppose a battery can store 3 kWh of surplus solar after accounting for losses. If using that energy avoids an import price of 25 pence per kilowatt-hour and exporting would earn 10 pence, the gross difference is 15 pence per kilowatt-hour before losses and system costs. If the export payment rises or evening consumption falls, the preferred setting may change. Review the calculation using your actual meter readings rather than relying on the illustrative figures above.

For export payment checks, see the guides to meter readings and missing SEG payments and comparing SEG tariffs.

When to recalculate

Review your settings at least monthly while you learn how the system behaves, then whenever a significant input changes. Recalculate after a tariff renewal, a change to import or export rates, a battery firmware update, a new EV, a change in occupancy or a new heating pattern. Also review the plan when your annual solar generation or battery performance appears different from expectations; the solar performance checking guide can help identify whether the issue is generation, consumption or storage.

Use this monthly template:

  1. Record import prices, export payments and the dates they apply.
  2. Record total solar generation, grid imports, exports and battery charge and discharge data.
  3. Note the battery’s minimum reserve and any periods when it was unable to follow the schedule.
  4. Compare the estimated saving with the actual bill change, allowing for standing charges and unusual demand.
  5. Adjust one setting at a time, then observe the result for several comparable days.

Use a higher solar-priority setting during periods when generation is reliable and daytime demand is low. Use a cautious grid-charging schedule during darker periods only when the effective stored cost is below the avoided import cost. Keep a reserve if backup matters, and never change electrical protection, export limits or installation wiring through the app without appropriate professional guidance.

Finally, keep your tariff terms, battery manual and installer documentation together. If a new system or major setting change is being considered, obtain comparable quotes from appropriately qualified installers and ask specifically how the proposed inverter, battery and export arrangement will operate together.

Related Topics

#battery settings#smart tariffs#self-consumption#off-peak charging#solar battery storage
P

Power Suppliers Editorial Team

Solar Energy Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.